Place bracket on the top corner of the recess in the window ensuring it is sitting flush against the top and side of the recess and mark with a pencil where the hole will be drilled. Do the same for the opposite side.
Drill the holes for the mounting bracket where you had marked with a pencil.
Place brackets back against the top recess corners and secure with screws provided.
Take the roller blind with the chain to the side of your choosing and attach the end cap on the other side of the blind.
Lift the blind and gently push the end cap into the bracket installed previously, to attach one side of the blind. Then carefully attach the other side of the blind (chain side) to the other bracket.
Secure chain to the wall/recess using the safety plastic hook provided.
Have a look as well our article “How to measure – Roller Blinds ?”
Place bracket above the window edge from top and the side and mark with a pencil where the hole will be drilled. Do the same for the opposite side.
Drill the holes for the mounting bracket where you had marked with a pencil.
Place brackets back against the top recess corners and secure with screws provided.
Take the roller blind with the chain to the side of your choosing and attach the end cap on the other side of the blind.
Lift the blind and gently push the end cap into the bracket installed previously, to attach one side of the blind. Then carefully attach the other side of the blind (chain side) to the other bracket.
Secure chain to the wall/recess using the safety plastic hook provided.
OUR SHOWROOMS
5 Yampi Way
Willeton 6155
Western Australia
1061 Thomas Rd
Anketell WA 6167
Western Australia
Phone: (08) 9258 8782
After hours : 0438 873 737
Email: [email protected]
Copyright 2022 © hanboblinds.com.au. All Rights Reserved. | Sitemap
Made with by BetweenElements.