How to install – Zebra Blinds


Note diagram is a view from the interior wall

For Recess Fit

  1. Unpackage

    Open your kit

  2. Layout

    Lay out your blinds on the floor under your window

  3. Measure & Mark

    Use snap provided in your kit to mark the hole on the ceiling using a pencil where the screw will attach to the ceiling.

  4. Drill

    Use the drill to make a hole where you marked the pencil dot.

  5. Secure Snap

    Use the screw to attach the snap to the ceiling/recess.

  6. Install Blind

    Lift the blind and attach the back edge of the top rail of the blind to back edge of the snap. Then gently push the blind upwards into position and you will hear a click sound which indicates the blind is in place.

  7. Install Safety Hook

    Secure chain to the wall/recess using the safety plastic hook provided.


Note diagram is a view from the interior wall

For Face Fit

  1. Unpackage

    Open your kit

  2. Layout

    Lay out your blinds on the floor under your window

  3. Measure & Mark

    Use bracket provided in your kit to mark the hole on the wall using a pencil where the screw will attach to the wall

  4. Drill

    Use the drill to make a hole where you marked the pencil dot.

  5. Secure Bracket

    Use the screw to attach the bracket to the wall.

  6. Attach Snap

    Attach the snap to the horizontal side (closest edge to you) of the bracket and turn until it is fixed into place – this means the round edge of the snap should be facing outwards.

  7. Install Blind

    Lift the blind and attach the back edge of the top rail of the blind to back edge of the snap. Then gently push the blind upwards into position and you will hear a click sound which indicates the blind is in place.

  8. Install Safety Hook

    Secure chain to the wall/recess using the safety plastic hook provided.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop